Contact
You can reach us from the contact information below.
Telephone +90 (262) 641 95 25
Mail info@silvanrolls.com
CB-P-45
Description
Adamite rolls are produced from alloyed (Cr-Ni-Mo) steel of pearlitic microstructure.
Rolls are subjected to heat treatment after casting to provide the best microstructure and mechanical properties for rolling conditions.
- Cr, Ni, Mo alloyed, steel based
- Pearlite + Carbide
- Constant hardness curve
- Tensile strength: 500 – 650 N/mm2 Bending strength: 850 – 1050 N/mm2
- On roughing stands and intermediate stands for sections
- Resistance to load
- Resistance to impact loads
- Resistance to thermal shocks
Hardness Profile
Microstructure
Chemical Analysis & Hardness
| HARDNESS (SHORE C) |
CHEMICAL ANALYSIS | |||||
| C% | Si% | Mn% | Cr% | Ni% | Mo% | |
| 43-48 | 1.2 - 1.7 | 0.2 - 0.7 | 0.6 - 1.2 | 0.5 - 1.5 | 0.2 - 1.5 | 0.2 - 0.8 |
Mechanical Properties
| MECHANICAL PROPERTIES | |||
| Tensile Strength (N/mm2) |
Bending Strength (N/mm2) |
Microstructure | |
| 500-650 | 850-1050 | Pearlite + Carbide | |
